Micro-Epsilon (Eltrotec)

(CLS-K-50 Compact-Verstärker)

CLS-K-50 Compact-Verstärker

Compact-Verstärker

CLS-K-63 Compact-Verstärker

(FAD-P-S-0,6-1200-67° Durchlichtleiter S=Sender D1,Empf.B1.2)

FAD-T-A3.0-3,0-1500-67° Durchlichtleiter

Adaptation board adjusted for ES1 type sensor, cable length 3m and non-ferromagnetic target material; (mounted in the DT3300 type controller

Adaptation board adjusted for ES2A type sensor, cable length 3m and non-ferromagnetic target material; (mounted in the DT3300 type controller)

Adaptation board adjusted for ES4 type sensor, cable length 3m and non-ferromagnetic target material; (mounted in the DT3300 type controller)

Adaptation board adjusted for EU8 type sensor, cable length 3m and non-ferromagnetic target material; (mounted in the DT3300 type controller)

Power supply, input 100-240 VAC, output +/-12 VDC and 5.2 VDC, with integral cable length 1.5 m and 7-pole female connector, for max. 4 multifunction controllers DT3300

Measuring range 0-1mm; mounting thread M8x1 with 3m (+/-15%) integral cable;

Shielded sensor Measuring range 1.0 mm mounting thread M8x1, sensor length 18 + 10 mm with 0.25 m integral coaxial cable (diameter 3 mm) and sealed triaxial female connector; max. operating temperature 150°C; housing material: stainless steel; compatible connecting cable: ECxx

Shielded sensor Measuring range 2 mm mounting thread M12x1, sensor length 25 mm with sealed triaxial female connector; pressure resistance (static): front 20bar and rearside splash water; max. operating temperature 150°C; housing material: stainless steel and plastics; compatible connecting cable: ECxx

Shielded sensor Measuring range 4 mm mounting thread M18x1, sensor length 25 mm with sealed triaxial female connector; pressure resistance (static): front 20bar and rearside splash water; max. operating temperature 150°C;housing material: stainless steel and plastics; compatible connecting cable: ECxx

Unshielded sensor Measuring range 8 mm mounting thread M24x1,5, sensor length 33,8 mm with sealed triaxial female connector; pressure resistance (static): front 20bar and rearside splash water; max. operating temperature 150°C; housing material: stainless steel and plastics; compatible connecting cable: ECxx

3 m long, with 8-pole female connector suitable to the signal conditioning controller, open ends for the connections

Supply and synchronisation cable, 0.3 m long with 7-pole male connector and 7-pole female connector suitable for multifunction controllers DT3300

(+/-0.45m)

EC3 Sensor cable, 3 m (+/-0.45 m) long with sealed triaxial straightline male and 5-pole female connector suitable to DT3300 type controller

Micrometer calibration fixture range 0-2,5mm, 1 micrometer/division; adjustable offset (zero), for sensors with range < 2 mm;

CableTM-PIF-TIM Prozess-Interface, 1m Kabel, integr. Elektronik

sensor

Signal conditioning electronics in compact aluminium housing,power supply 9 ... 36 VDC or +/- 15 VDC,output: 0 ... 10 V and 4 ... 20 mA;adjusted for ferromagnetic targetmaterial (reference mild steel St37),adjusted for sensor ... (Serial Number on theelectronics label) and ... m interconnecting cable

Multifunction Controller Single-channel electronics for eddy current displacement sensors, with integrated LC-grafic display, aluminium housing, Output: 0-10 Volt and current output 4 - 20 mA, feeding +/-12 VDC / 100 mA and 5.2 VDC / 220 mA

THERMOL MAGERthermoIMAGER TIM 160 Wärmebildkamera mit 48°-Optik Infrarot-Kamera mit USB 2.0 Anschluss Temperaturmessbereiche: -20°C - 100°C, 0°C - 250°C, 150°C - 900°C (umschaltbar) Spektralbereich: 7,5 -13 μm Optische Auflösung: 160x120 Pixel Thermische Auflösung: 0,1°C Objektivbrennweite: f=4,5mm / 48°-Objektiv Emissionsgrad: 0,1 - 1,0 einstellbar Umgebungstemperatur: 0°C - 50°C Lagertemperatur: -40°C - 70°C Schutzklasse: IP67 Signalausgang: USB2.0 Bildwiederholfrequenz : 120Hz